• Acoustic Eye boiler tube inspection was carried out successfully on a vessel in Singapore waters.
  • 10th Acoustic Eye heat exchanger tube inspection was carried out at an oleochemical plant in Malaysia.
  • 6th Acoustic Eye heat exchanger tube inspection was carried out at a polyester plant in Indonesia.
  • Acoustic Eye reboiler tube inspection was carried out successfully at a chemical plant in Malaysia.
  • Acoustic Eye heat exchanger tube inspection was carried out successfully at a petrochemical plant in Thailand.
  • Acoustic Eye heat exchanger tube inspection was carried out successfully at a petrochemical plant in UAE.
  • Repeat Acoustic Eye reboiler tube inspection was carried out successfully at an oleochemical plant in Malaysia.
  • Acoustic Eye tube inspection was carried out successfully at a petrochemical plant in Kazakhstan.
  • Acoustic Eye inspection for air-cooled heat exchanger was carried out successfully in a power utility plant in Indonesia.
  • Repeat Acoustic Emission Inspection for 4 Above Ground storage Tank Bottom was carried out successfully in Kazakhstan.
  • Acoustic Emission Inspection for an Above Ground storage Tank Bottom was carried out successfully at a refinery at Singapore.
  • Long Range Ultrasonic Testing (LRUT) inspection carried out for Plant Piping System with diameters from 2” to 24” at an Ammonia Plant in Egypt.
  • Long Range Ultrasonic Testing (LRUT) inspection carried out for buried pipelines in Egypt.
  • Magnetic Flux Leakage (MFL) inspection for floor mapping of storage tank conducted in Indonesia.
  • Magnetic Flux Leakage (MFL) inspection for floor mapping of storage tank conducted in Kazakhstan.
  • Online Phased Array Ultrasonic Testing (PAUT) & Time of Flight Diffraction (TOFD) inspection of Ammonia tank welds while in service at -35°C at a Chemical Manufacturing facility in Jordan.
  • Four (4) Phased Array Ultrasonic Testing (PAUT) inspections carried out at various onshore & offshore facilities in Kazakhstan.
  • Alternating Current Field Measurement (ACFM) inspection for near surface crack detection (Eddy Current Inspection) carried out in Kazakhstan.
  • Pulsed Eddy Current (PEC) Testing of 10 pressure vessels (insulated ammonia & air vessels) conducted at a Beverage manufacturing facility in Egypt.
  • Remote Visual Inspection (RVI) on the Demister surface of Deethaniser Preflash Drum & Low Temperature Separator carried out in Kazakhstan.
  • Corrosion under Pipe Support (CUPS) inspection carried out at a FPSO facility in Indonesia using Short Range Ultrasonic Testing (SRUT) method.
  • Four (4) – Eddy Current Testing (ECT) & Internal Rotary Inspection System (IRIS) carried for Heat Exchangers & Chillers at various facilities in UAE.
  • Eddy Current Testing (ECT)/ Internal Rotary Inspection System (IRIS)/ Near-Field Testing (NFT) carried out for Heat Exchanger in Kazakhstan.